All Industrial Services Inc. of New Jersey| 190 Boundary Rd, Marlboro, NJ 07746
quote@rbaker.com| 732-222-3553|         
 
All Industrial Services Inc. of New Jersey| 190 Boundary Rd, Marlboro, NJ 07746
quote@rbaker.com| 732-222-3553|         
190 Boundary Rd, Marlboro, NJ 07746 732-222-3553
asset recovery, rigging team with sling and interior demolition

3D Rigging and Routing Plans, BIM

3D Rigging and Routing

Every sizable project that involves the installation of large equipment in or outside a building requires a rigging and routing plan. It wasn’t long ago that rigging and routing plans were achieved with hand-measurements, two-dimensional drawings, and paper cutouts. Now, rigging and routing plans are often developed building information modeling (BIM).

BIM modeling is achieved through a combination of existing data and 3D laser scanning. The data is used to develop models detailing precise locations of existing and planned structural features, piping, ductwork, equipment, etc., down to the fraction of an inch. These 3D models are combined with 4D project information – equipment that is to be installed, including physical dimensions, weight, how many pieces, and when it will arrive – to arrive at a rigging and routing plan. BIM can provide critical information on features that may need to be temporarily delayed, moved, or removed to accommodate the rigging of large equipment.  Using BIM for developing rigging and routing plans allows for greater accuracy, helps identify potential logistical problems, and keeps project costs down by eliminating delays due to planning errors.

About R. Baker & Son All Industrial Services

R. Baker & Son All Industrial Services, a  Service-Disabled Veteran-Owned Small Business (SDVOSB)  in business since 1935, is a premier specialized contractor operating in the United States, Canada and Puerto Rico, with over one hundred employees and an exemplary safety record (we have been directly involved in four sites that received VPP OSHA Safety Awards). R. Baker & Son is financially strong, with bonding capabilities over $10 million. Capabilities include industrial and commercial demolition, rigging, machinery- and plant-moving, dismantling, decommissioning, plant and equipment relocation, interior demolition, selective demolition, warehousing, wrecking and razing, millwright, plant reconfigurations, heavy rigging, salvage, environmental services, remediation, decontamination, abatement, and investment and asset recovery.

R. Baker & Son - All Industrial Services
1 Globe Court
Red Bank, NJ 07701
732-222-3553
http://www.rbaker.com


 

Full News Archive

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

Recent News

holding tank agitators, bioprocess facility
Plant Machinery Updates and Replacements

An equipment manufacturer that had worked closely with R. Baker & Son in the past called us regarding a bioprocess facility requiring several key changes to eight large holding tank agitators....
Understanding Physics and Construction are Vital in Demolition
Understanding Physics and Construction are Vital in Demolition

When demolishing a building or other structure, it’s important for the demolition contractor to first understand how it was constructed. The way in which foundations, frames, floors, beams,...
Hazard signs for demolition and construction company R. Baker
Slips, Trips and Falls According to OSHA

According to OSHA, slips, trips, and falls account for the majority of general industry accidents, and they are the greatest hazard in the construction industry. Each year, more than 500,000...
Fire truck being lowered into 9/11 Museum NYC
Spreader Beams a Top Choice for Rigging Stability and Safety

The spreader beam, also known as a spreader bar, is a popular below-the-hook lifting device used to widen lifting points and stabilize and support a load during a crane lift. It consists of a long...
Safety Basics for Demolition Work, photo shows lighting around demolished concrete
Important Safety Basics for Interior Demolition Projects

Demolition can be a dirty business with ever-changing safety concerns. Every project is unique, but there are three basic things that should be addressed in every interior demolition project to help...
Tool and Equipment Tracking - Crane Rigging NYC
Tool and Equipment Tracking - Crane Rigging

Crane rigging requires a lot of tools and equipment. Visitors to a large R. Baker & Son rigging operation might see forklifts, cranes, excavators, generators, articulating booms, front loaders,...
 Sweeping Compounds for Cleanup of Demolition Dust, Dirt, Silica, and Other Particulates
Cleanup of Demolition Dust, Dirt, Silica, and Particulates

Demolition is a dirty job that can produce layers of dirt, dust, and silica that settle on floors and other flat surfaces. There are various techniques and equipment such as misting cannons,...
Rigging equipment, rigging hook, NYC
Auger and Centrifuge Rigging Project

An existing customer called R. Baker & Son needing assistance with rigging equipment duringtheir facility’s annual cleaning and maintenance project. The manufacturing plant was set up for...