All Industrial Services Inc. of New Jersey| 190 Boundary Rd, Marlboro, NJ 07746
quote@rbaker.com| 732-222-3553|         
 
All Industrial Services Inc. of New Jersey| 190 Boundary Rd, Marlboro, NJ 07746
quote@rbaker.com| 732-222-3553|         
190 Boundary Rd, Marlboro, NJ 07746 732-222-3553
asset recovery, rigging team with sling and interior demolition

Emergency Generator Repair at NJ Hospital

Emergency Generator Repair at NJ Hospital

R. Baker & Son was performing rigging and demolition on a mechanical HVAC renovation project at a northern New Jersey hospital when a utility power failure occurred. All of the hospital’s generators came on as required, but one failed during the cool-down cycle after running for a few hours due to a cylinder malfunction on a 2,000 kW diesel engine. Fortunately, the power was restored just minutes later and the generator’s failure cause no adverse effects in the hospital, but it was determined that repairing the engine would have a poor return on investment. A new diesel engine was located and ordered for emergency shipment to the hospital, along with a temporary emergency generator and cable should there be a power failure during replacement, and R. Baker & Son was tasked with the removal of the failed generator and rigging and setting the replacement. 

The existing generators were located in the basement in concrete vaults, and the only access point large enough to accommodate equipment was an air shaft not much larger than the units. With the assistance of a generator manufacturer representative, a Baker crew separated the failed diesel engine from the generator and carefully maneuvered it into the air shaft using several chain hoists and spreader bars. Once positioned in the air shaft, an 80-ton hydraulic crane was used to lift the old engine out through the hospital’s roof and rig the replacement engine down through the shaft and into the basement vault for installation. The entire operation, from disassembly and removal of the old engine to rigging in and installing the replacement, was accomplished in just nine hours by R. Baker & Son’s team of riggers and millwrights.

About R. Baker & Son All Industrial Services

R. Baker & Son All Industrial Services, a Minority and Women-Owned Business Enterprise (M/WBE), in business since 1935, is a premier specialized contractor operating in the United States, Canada, and Puerto Rico, with over one hundred employees and an exemplary safety record (we have been directly involved in four sites that received VPP OSHA Safety Awards). R. Baker & Son is financially strong, with bonding capabilities of over $10 million. Capabilities include industrial and commercial demolition, rigging, machinery- and plant-moving, dismantling, decommissioning, plant and equipment relocation, interior demolition, selective demolition, warehousing, wrecking and razing, millwright, plant reconfigurations, heavy rigging, salvage, environmental services, remediation, decontamination, abatement, and investment and asset recovery.

R. Baker & Son - All Industrial Services
190 Boundary Road
Marlboro, NJ 07746
732-222-3553

https://rbaker.com/

Full News Archive

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

Recent News

Secure storage of industrial boiler for rigging and assembly projects in New York and New Jersey.
Rigging Services for NYC and NJ: Offsite Storage & Asset Management

For rigging projects in New York City and New Jersey, access to secure offsite storage and asset management is a crucial component of rigging, setting, and assembly operations,helping accommodate...
Safe rigging procedures and equipment inspection - R. Baker & Son
Rigging: A Complete Guide to Safety, Equipment, and OSHA Standards

Rigging is one of the most critical operations in heavy industry, and at R. Baker & Son, we specialize in safe, compliant lifting with the right equipment, planning, and OSHA-certified practices....
Workers in PPE during National Construction Safety Stand Down
Construction Safety Stand Down: History and Purpose

The Construction Safety Stand Down is an annual event aimed at raising awareness about safety in the construction industry, particularly focusing on fall protection. This initiative serves as a...
R. Baker & Son performing safe, sustainable rigging and demolition in NYC and NJ, with turnkey and MWBE-certified services
The Future of Rigging & Demolition in NY & NJ

The Evolving Landscape of Heavy Industrial Services in NYC & NJ R. Baker & Son stands as a cornerstone in the industrial services sector, with a profound legacy rooted in decades of...
Rigging NY and NJ icons, Statue of Liberty, R. Baker and Son
Rigging NYC and NJ - Most Iconic Structures with Expert Precision

For 90 years, R. Baker & Son has been a cornerstone of rigging services in New York and New Jersey, expertly undertaking complex lifting, moving, and safeguarding operations for some of the...
Telescopic crane lifting heavy equipment during a rigging project in NJ & NY
Why Telescopic Cranes Are Essential in Rigging Work

It is remarkable how innovation and technology continue to change and improve construction equipment. Manufacturers have evolved to create machinery that serves multiple purposes at job sites. A...
16,000-gallon mixing tanks, each with an 18-ft agitator with a 3-inch shaft
Expert Rigging and Maintenance for Industrial Mixing Tanks

A new client reached out to R. Baker for rigging services, regarding a challenging issue affecting their production and throughput. We were referred by an engineer with whom we had worked in the...
Vertical Water Curtains, The Future of Dust Control, Dustboss Water Cannon
Vertical Water Curtains: The Future of Dust Control in Urban Implosions

Many implosion demolition projects always make the news as it's impressive to see a perfectly timed implosion where the building literally falls into itself. The engineering behind it and the...