All Industrial Services Inc. of New Jersey| 190 Boundary Rd, Marlboro, NJ 07746
quote@rbaker.com| 732-222-3553|         
 
All Industrial Services Inc. of New Jersey| 190 Boundary Rd, Marlboro, NJ 07746
quote@rbaker.com| 732-222-3553|         
190 Boundary Rd, Marlboro, NJ 07746 732-222-3553
asset recovery, rigging team with sling and interior demolition

Demo Protection on Pharmaceutical Project

Demolition Contractor in NJ

Some interior or select demolition projects are complete guts or tear outs where everything must go. Some items need to be identified as not to demolish and remove; this can be done with marking with spray paint, colored ribbons or other. However, some projects and the items left behind need to be protected from any and all accidental demolition damage. Color marking or identifying is not enough. On many select demolition projects that R Baker gets involved in, require us to protect items during demolition that are very expensive and cannot be replaced or protecting something critical to the operation of a facility. Case in point on one particular pharmaceutical project R Baker had to protect many very expensive laboratory countertops that word to remain during demolition.

The countertops were cleaned and photographed then wrapped in floor protection material then a 2 x 4 frame and three-quarter inch plywood over all countertops to protect them from any falling debris, scratches or mishaps. On the same project next-door critical single mode and multimode fiber optic network‘s needed to be protected from any damage or accidental cutting.

The fiber optic inner duct was the company’s network that kept them in business. The multiple inner ducts were framed in with 2 x 4 construction wrapped in three-quarter inch plywood and supported with steel knee braces. Each client has particular needs of things they do not wish to demo, on other projects, there is too much at risk to leave it to chance. Once the demolition was complete, the protection was left in place through the new construction then removed at the tail end of the project near completion. Everything was in the same condition as found.

About R. Baker & Son All Industrial Services

R. Baker & Son All Industrial Services, a  Service-Disabled Veteran-Owned Business (SDVOB)  in business since 1935, is a premier specialized contractor operating in the United States, Canada and Puerto Rico, with over one hundred employees and an exemplary safety record (we have been directly involved in four sites that received VPP OSHA Safety Awards). R. Baker & Son is financially strong, with bonding capabilities over $10 million. Capabilities include industrial and commercial demolition, rigging, machinery- and plant-moving, dismantling, decommissioning, plant and equipment relocation, interior demolition, selective demolition, warehousing, wrecking and razing, millwright, plant reconfigurations, heavy rigging, salvage, environmental services, remediation, decontamination, abatement, and investment and asset recovery.

R. Baker & Son - All Industrial Services
190 Boundary Road
Marlboro, NJ 07746
732-222-3553

http://rbaker.com/

Full News Archive

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

Recent News

Machine skates and heavy load movement - Rigger
Rigger's Guide to Machine Skates - Role in Heavy Load Movement

In the realm of rigging, machine skates, also known as moving skates, roller skids, or dollies, have been used in one form or another throughout history. In their various forms, these devices are...
excavator at demolition site, questions about demolition contracting
Seven Key Questions Clients Want to Know About Demolition

When it comes to demolition projects, ranging from total building teardowns to selective demolition and everything in between, clients are faced with the challenge of finding the right demolition...
Interior Demolition Project - School Converted to Residential Units
Interior Demo of Old School for Conversion to Residential Units

An architect that R. Baker & Son has collaborated with reached out to us with a special interior demolition opportunity in South Jersey. The project held sentimental value for her as it involved...
heavy machinery moving, Versa-Lift
Versa Lift

When it comes to the demands of moving heavy machinery and materials, there are few tools that can handle these tasks better than the Versa-Lift by Custom Mobile Equipment, Inc. Not to be confused...
The Importance of Using the Right Rigging Equipment
Emergency Call Shows - Value of the Right Rigging Equipment

The importance of using the proper equipment for a rigging operation was illustrated recently when R. Baker & Son responded to a late afternoon emergency call from one of our regular...
Wall and structural support - Rigging and Demolition
Structure Support is Critical on Demolition Projects

Supporting a structure is a critical part of many interior demolition, selective demolition, and dismantling projects. Proper shoring and bracing require an experienced demolition contractor that has...
rigging project of stainless-steel tanks
R. Baker & Son Saves Client Over $100K on Rigging Project

Last winter, R. Baker & Son was contacted by a consulting engineer we’d worked with in the past asking us to take a look at a rigging project. Another rigging contractor had previously been...
excavator for demolition and rigging equipment
Hats Off To Mechanics

There are various pieces of machinery that provide the muscle for demolition and rigging projects, from large cranes and excavators to smaller equipment like skid steers, scissor lifts, articulating...