All Industrial Services Inc. of New Jersey| 190 Boundary Rd, Marlboro, NJ 07746
quote@rbaker.com| 732-222-3553|         
 
All Industrial Services Inc. of New Jersey| 190 Boundary Rd, Marlboro, NJ 07746
quote@rbaker.com| 732-222-3553|         
190 Boundary Rd, Marlboro, NJ 07746 732-222-3553
asset recovery, rigging team with sling and interior demolition

Historic Preservation of Coastal Defense Gun Battery

R. Baker & Son Assists with Historic Preservation of Coastal Defense Gun Battery at Ft. Hancock, Sandy Hook NJ.

R. Baker & Son All Industrial Services, a leader in the demolition, wrecking, dismantling and rigging industry, recently assisted the Army Ground Forces Association and the National Park Service with the restoration and preservation of Battery Gunnison/New Peck.  This battery is located at Fort Hancock, which is situated at the Gateway National Recreation Area of Sandy Hook, New Jersey.

Battery Gunnison/New Peck is one of the last US Army seacoast artillery batteries in the continental United States that retains its original armament.  Over 500 batteries were constructed between 1895 and 1944, and of those only about six remain with their original armament still in place. While over 40 examples of seacoast artillery guns still exist, this particular battery retains the only 6-inch M1900 seacoast rifles in existence.

R. Baker & Son All Industrial Services (R. Baker & Son) assisted the Army Ground Forces Association (AGFA) by donating several mechanics and equipment to assist with restoration activities at the historic gun battery.

The partnership between R. Baker & Son and the AGFA was made possible through the extraordinary efforts of Justin. Justin is a 9 year old Cub Scout and student at St. Veronica’s School.  He has an interest in military history and the restoration of forts and military artifacts.  This interest, coupled with his belief in giving back to the community, motivated Justin to pursue a means to assist the AGFA with their historic preservation efforts. His Aunt Sandra works for R. Baker & Son and together they encouraged the Bakers to donate manpower and equipment.  These efforts have greatly advanced the objectives of AGFA in their quest to properly restore and interpret this battery for the American People.

R. Baker & Son would like to thank Justin for his efforts. His insightfulness and efforts for a young man of 9 are commendable and remarkable.  

Pictures of the project can be seen at Historic Preservation Project

About R. Baker & Son All Industrial Services

R. Baker & Son All Industrial Services is the premier specialized contractor for dismantlement, decommissioning and demolition in the United States, Canada and Puerto Rico.  The veteran owned company has been in business since 1935, has over 100 employees, an exemplary safety record (We have been directly involved in four (4) sites that received VPP OSHA Safety Awards) and is financially strong (bonding capabilities over $10 Million).  Capabilities include total plant and facility dismantlement, decommissioning, demolition, plant relocations and re-installations as well as heavy equipment rigging and machinery moving, millwright services and onsite concrete crushing.

Corporate Contact Information

R. Baker & Son All Industrial Services
1 Globe Street
Red Bank, NJ 07701
Phone: 732-222-3553
Fax: 732-450-0311
Website: www.rbaker.com

For more information visit our website or email marketing@rbaker.com

Full News Archive

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

Recent News

R. Baker & Son rigging team performing final precision positioning and alignment of a multi-ton medical MRI magnet onto its concrete anchoring pad inside a specialized hospital imaging room.
MRI & Medical Imaging Equipment Rigging: A Turnkey Installation Case Study

Medical equipment rigging and installation requires a specialized approach to protect high-value, delicate assets. At R. Baker, we successfully navigate these complex rigging projects using...
R. Baker and son welding on complex hospital demolition job
Hospital Boiler Room Demolition: Removing Steam Boilers and Mechanical Equipment

R. Baker & Son was tasked with a complex demolition project at an active hospital, systematically removing two aging Cleaver-Brooks steam boilers (a 350 HP and a 200 HP unit), along with an...
R. Baker & Son rigging team deploying specialized heavy-lift cranes and moving equipment to position critical backup power generators and electrical infrastructure at an enterprise data center.
Turnkey Data Center & Energy Infrastructure Rigging

The digital economy and the new energy economy are being built simultaneously, and both require moving extremely heavy, extremely expensive, and extremely sensitive equipment with zero margin for...
Custom 2,600 lb finishing beam aligned to an industrial dryer drum.
Industrial Drum Refinishing Support: A Custom Rigging and Structural Solution

When a manufacturer we had previously performed rigging assembly and installation work for returned more than a year later with a unique and complex challenge, they knew who to call. The company...
Air skates (air casters) lifting and moving multi-ton industrial equipment using compressed air in a plant relocation project
Air Skates: How to Move Multi Ton Loads Without Touching the Floor

Air skates, also known as air casters, air skids, or air dollies, are a specialized rigging solution that R. Baker & Son has deployed for many years to move heavy machinery, fragile equipment,...
demolition innovation in protection - substation, non metallic wire mesh,
Demolition Protection: Safeguarding People, Property & Critical Systems

What Demolition Protection Truly EntailsIn the complex world of demolition, protection goes far beyond basic safeguards. As therecognized leader in demolition protection, R. Baker & Son defines...
R. Baker & Son rigging crew performing pre-construction planning and heavy equipment rigging for demolition and industrial plant relocation project
Precon Services for Demolition, Rigging & Plant Relocation

For more than 90 years, R. Baker & Son has been delivering expert precon services for demolition, rigging, and industrial plant relocation projects. Before any construction work begins, our team...
Rigger working on R. Baker & Son - All Industrial Services. Welding.
Rigging, Assembly and BIM: Bridging the Gap

Prefabricated equipment and systems have become the standard for good reason. The more you can prefabricate, the faster, more cost-effective, and higher quality a project becomes. The goal is simple:...