All Industrial Services Inc. of New Jersey| 190 Boundary Rd, Marlboro, NJ 07746
quote@rbaker.com| 732-222-3553|         
 
All Industrial Services Inc. of New Jersey| 190 Boundary Rd, Marlboro, NJ 07746
quote@rbaker.com| 732-222-3553|         
190 Boundary Rd, Marlboro, NJ 07746 732-222-3553
asset recovery, rigging team with sling and interior demolition

3D Laser Scanning Excellent Tool for Project Planning

3D Laser Scanning Excellent Tool for Project Planning

Oftentimes when a facility must undergo renovation, relocation, or demolition, drawings and documentation of the original construction and subsequent renovations are inaccurate, incomplete, or missing entirely.  Because an accurate record of existing conditions is needed to produce detailed estimates and project plans, new drawings must be developed, which can be a difficult, time-consuming undertaking.  This is where 3D laser scanning technology can provide an ideal solution.

Until recently, the development of existing-condition documentation required personnel to take extensive measurements by hand using electronic or standard tape measures, then converting them 2D documents or CAD files.  This method can be particularly labor intensive, especially in spaces where a complicated array of equipment, piping, and structural components are present, and the possibility of inaccuracy or error can be high.  With 3D laser scanning technology, scans done by a single surveyor are incorporated into BIM software to create CAD files in far less time as compared to the field-measured approach, require fewer personnel, and usually are far less costly.  These 3D models contain a vast, highly-detailed amount of information of piping and structural systems with accuracy to within one-eighth of an inch.

The benefits of 3D laser scanning are numerous.  The scanning procedure is non-intrusive and causes very little disruption to facility operations.  On-site measuring and in-house documentation time is greatly reduced.  Objects in difficult-to-access areas can be safely and precisely measured.  Equipment, conduit, pipes, ductwork, catwalks, structure, and other details are separated into layers, and flythrough photo-quality views can be developed, allowing greater detail and visualization. In R. Baker & Son’s line of business, 3D laser scanning is highly valuable for planning selective demolition, plant relocation, rigging and routing, new installations, and other projects.  Accurate spatial information allows greater precision, helps to identify potential problems, and keeps costs in check.  Finally, 3D models and as-built surveys can be electronically stored indefinitely for use on future projects.

About R. Baker & Son All Industrial Services

R. Baker & Son All Industrial Services, a Service-Disabled Veteran-Owned Small Business (SDVOSB) in business since 1935, is a premier specialized contractor operating in the United States, Canada and Puerto Rico, with over one hundred employees and an exemplary safety record (we have been directly involved in four sites that received VPP OSHA Safety Awards). R. Baker & Son is financially strong, with bonding capabilities over $10 million. Capabilities include industrial and commercial demolition, rigging, machinery- and plant-moving, dismantling, decommissioning, plant and equipment relocation, interior demolition, selective demolition, warehousing, wrecking and razing, millwright, plant reconfigurations, heavy rigging, salvage, environmental services, remediation, decontamination, abatement, and investment and asset recovery..

Demolition, wrecking and razing, rigging, millwright, plant reconfigurations, heavy rigging, Service-Disabled Veteran-Owned Small Business / SDVOSB, salvage, dismantling, decommissioning, plant and machinery moving, building demolition, riggers, environmental services, remediation, decontamination, abatement, interior demolition, investment and asset recovery.

R. Baker & Son All Industrial Services
1 Globe Street
Red Bank, NJ 07701
Phone: 732-222-3553
Fax: 732-450-0311
Web: http://www.rbaker.com

Full News Archive

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

Recent News

Hospital Corridor Before Demolition by R. Baker & Son
R. Baker & Son Hospital Wing Interior Demolition

R. Baker & Son was awarded a project to perform interior demolition of a 55,000 sq/ft three-story patient area in a New York hospital. The wing, erected in the early 1980s and renovated in the...
Rigging Equipment Contractor - Rigging lift in NYC
R. Baker & Son's Rigging Expertise Shines in Pharma Expansion

R. Baker & Son, an industrial tri-state contractor specializing in selective demolition and rigging services, showcased our exceptional skills during a challenging project at a high-tech...
demolition equipment at JFK NYC
R. Baker & Son Comprehensive Equipment Management Strategy

Demolition projects demand specialized equipment, machines, and tools to ensure safe and efficient execution. At R. Baker & Son, we employ an array of assets, including excavators, cranes,...
rigging project planning, man welding steel beams
Expert Rigging: Meticulous Planning for Safe Lift Projects

A major rigging project demands meticulous planning and execution. While the actual lift may only span a day or two, it represents the culmination of weeks or even months of intense...
Rigging Equipment, skyline NYC, Women Owned Business
Efficient Rigging and Equipment Setup: Planning and Collaboration

R. Baker & Son was contacted by a large mechanical contractor with whom we have worked in the past and who works in the New Jersey-Philadelphia area. They had a large renovation project that...
Environmental Solutions for Dismantling, Decommissioning and Demolition
Eco-Friendly Solutions for Dismantling, Demo & Decommissioning

Demolition, dismantling, or decommissioning of industrial facilities is a complex process that requires meticulous planning and execution. These sites often contain hazardous chemicals, substances,...
Selective Demolition and Rigging at Process Plant
Selective Demolition and Rigging at Process Plant

R. Baker & Son recently performed selective demolition and equipment rigging for a process plant construction project. The selective demolition was necessary to prepare the existing facility to...
Chiller and Cooling Tower Installation at a South Jersey Hospital
Rigging Success: Chiller & Cooling Tower Installation at Jersey Hospital

Recently, R. Baker & Son team was faced with the task of installing a new 1200-ton chiller and double cell cooling tower at a South Jersey hospital. The project was referred to us by a trusted...