All Industrial Services Inc. of New Jersey| 190 Boundary Rd, Marlboro, NJ 07746
quote@rbaker.com| 732-222-3553|         
 
All Industrial Services Inc. of New Jersey| 190 Boundary Rd, Marlboro, NJ 07746
quote@rbaker.com| 732-222-3553|         
190 Boundary Rd, Marlboro, NJ 07746 732-222-3553
asset recovery, rigging team with sling and interior demolition

Rigging Safety Guidelines and Procedures

Rigging Safety Guidelines - Industrial Services

Safety is paramount at R. Baker & Son, which is why we strictly observe all rigging safety regulations, guidelines and procedures on every lift we do. 

Guidelines for rigging safety:

Inspect the condition of your equipment on a daily basis.  Check cables for kinks or worn or broken wires, and slings and straps for fraying or cuts.  Hooks, shackles, and pins should not be bent, and metal should not show corrosion, cracks, or excessive wear.  Any equipment showing damage, no matter how slight, must be immediately removed from service.  

*Know your equipment, and use it properly: equipment and accessories should be selected based on precise load size and weight analyses and calculations.  There is no room for error in rigging; if a load doesn’t meet the safe capacity, don’t make the lift.  

*Develop an approved pick plan where required and whenever possible.  Determine whether a tagline is necessary, especially where clearances are limited.  

*Check slings and connections: Before lifting, remove slack from slings and watch for sharp or jagged edges that may damage the sling.  Ensure that connection points are tight and secure.  

*Position cranes on stable ground and make sure the area is sufficient to accommodate the crane outriggers, and the load.  

*Take precautions when there are high winds, and be prepared for sudden gusts.  If winds exceed or threaten to exceed safe limits, do not make the lift.

*Designate team leaders and signal persons, and assign specific roles to team members taking part in the lift. 

*Crane operators should first lift a load a few inches to make sure it is properly balanced and secured and the equipment is functioning properly.  

*Loads should be moved smoothly over the planned route, with no sudden movements. When necessary, riggers use taglines to control a load and prevent spinning from a safe distance.  

R. Baker & Son’s expert team includes master riggers, professional engineers, and skilled rigging tradesman capable of handling even the most challenging and complex rigging projects. We provide clients with a full selection of rigging services including rigging of heavy equipment and machinery, sensitive pharmaceutical and manufacturing equipment, rigging and dismantling of equipment and process lines, equipment salvage and removal, match marking, reinstallation, and millwrighting. 

About R. Baker & Son All Industrial Services

R. Baker & Son All Industrial Services, a  Service-Disabled Veteran-Owned Business (SDVOB)  in business since 1935, is a premier specialized contractor operating in the United States, Canada and Puerto Rico, with over one hundred employees and an exemplary safety record (we have been directly involved in four sites that received VPP OSHA Safety Awards). R. Baker & Son is financially strong, with bonding capabilities over $10 million. Capabilities include industrial and commercial demolition, rigging, machinery- and plant-moving, dismantling, decommissioning, plant and equipment relocation, interior demolition, selective demolition, warehousing, wrecking and razing, millwright, plant reconfigurations, heavy rigging, salvage, environmental services, remediation, decontamination, abatement, and investment and asset recovery.

R. Baker & Son - All Industrial Services
190 Boundary Road
Marlboro, NJ 07746
732-222-3553

http://rbaker.com/

Full News Archive

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

Recent News

Concrete Slab X-Rays Enable Accurate Cutting and Drilling
Concrete Slab X-Rays Enable Accurate Cutting and Drilling

R. Baker & Son was recently involved in a selective demolition project at a four-story, 90,000 sq. ft. R&D lab facility with basement and penthouse where all forty-six laboratories would be...
Baker Wins 3 Highwire Platinum Safety Awards
R. Baker & Son Wins 3 Highwire 2022 Platinum Safety Awards

R. Baker & Son - All Industrial Services was awarded 3 HighwirePlatinum Safety Awards for 2022! The Safety Assessment Program reviews a company’s historic safety performance and current...
Rigging and Assembly in New Storage and Maintenance Facility
Rigging and Assembly in New Storage and Maintenance Facility

A longtime customer referred R. Baker & Son to a company in need of immediate assistance at their company’s new storage facility. Truckloads of various materials and equipment were arriving...
holding tank agitators, bioprocess facility
Plant Machinery Updates and Replacements

An equipment manufacturer that had worked closely with R. Baker & Son in the past called us regarding a bioprocess facility requiring several key changes to eight large holding tank agitators....
Understanding Physics and Construction are Vital in Demolition
Understanding Physics and Construction are Vital in Demolition

When demolishing a building or other structure, it’s important for the demolition contractor to first understand how it was constructed. The way in which foundations, frames, floors, beams,...
Hazard signs for demolition and construction company R. Baker
Slips, Trips and Falls According to OSHA

According to OSHA, slips, trips, and falls account for the majority of general industry accidents, and they are the greatest hazard in the construction industry. Each year, more than 500,000...
Fire truck being lowered into 9/11 Museum NYC
Spreader Beams a Top Choice for Rigging Stability and Safety

The spreader beam, also known as a spreader bar, is a popular below-the-hook lifting device used to widen lifting points and stabilize and support a load during a crane lift. It consists of a long...
Safety Basics for Demolition Work, photo shows lighting around demolished concrete
Important Safety Basics for Interior Demolition Projects

Demolition can be a dirty business with ever-changing safety concerns. Every project is unique, but there are three basic things that should be addressed in every interior demolition project to help...