All Industrial Services Inc. of New Jersey| 190 Boundary Rd, Marlboro, NJ 07746
quote@rbaker.com| 732-222-3553|         
 
All Industrial Services Inc. of New Jersey| 190 Boundary Rd, Marlboro, NJ 07746
quote@rbaker.com| 732-222-3553|         
190 Boundary Rd, Marlboro, NJ 07746 732-222-3553
asset recovery, rigging team with sling and interior demolition

Completes Critical Installation of Generator for Private Client

R. Baker and Son All Industrial Services, an expert rigging, machinery moving and equipment relocation contractor recently completed the rigging and rough setting of a 4,000 lb backup generator for a private client in New Jersey.

R. Baker & Son All Industrial Services (R. Baker & Son) was contracted by a private client to offload, rig and set a 4,000 lb generator onto a concrete pad.  The client contracted R. Baker & Son to perform the work due to their impeccable safety record (EMR 0.79), professionalism and cost effectiveness.

Prior to the commencement of work, R. Baker & Son conducted several evaluations and the development of a critical lift plan.  An evaluation of the area where the crane and equipment would be placed was conducted to ascertain ground stability and the potential for underground utilities.  The weight of the generator was also considered to determine proper selection of necessary slings and associated rigging equipment.  Based on the weight of the generator and the calculation of height and radius from center pin of crane to desired placement of generator, R. Baker & Son determined that the appropriate sized crane needed to be a 50 ton hydraulic crane

The work began by coordinating the delivery of the generator to the site with the mobilization of the crane and rigging crew.  The project needed to be completed in one day so timing was crucial.

R. Baker & Son mobilized a three (3) man expert rigging crew along with a 50 ton hydraulic crane to the site.  In addition, ancillary rigging equipment (shackles, nylon straps, etc.) and safety equipment (fire extinguishers, safety kit, etc.) were also delivered to the site.

The flat bed truck delivering the generator and the rigging crew along with crane were expertly coordinated to the site and all arrived on time in the morning.  The generator was then carefully lifted from the flatbed and then carefully placed onto the concrete pad.  The generator was rough set.

The project was completed within the 1 day timeframe set by the client.  The project was incident and accident free.  For more information on R. Baker & Son’s capabilities and projects completed, please visit http://www.rbaker.com

About R. Baker & Son All Industrial Services

R. Baker & Son All Industrial Services is the premier specialized contractor in the United States, Canada and Puerto Rico.  The veteran founded company has been in business since 1935, has over 100 employees, an exemplary safety record (We have been directly involved in four (4) sites that received VPP OSHA Safety Awards) and is financially strong (bonding capabilities over $10 Million).  Capabilities include industrial and commercial demolition, riggingmachinery & plant moving, dismantling, decommissioning, plant and equipment relocation, interior demolition, wrecking, selective demolition , demolition contractors in NJ and warehousing.

Contact Information

R. Baker & Son All Industrial Services
1 Globe Court
Red Bank, NJ 07701
Phone: 732-222-3553
Fax: 732-450-0311
Website: http://www.rbaker.com
Email: marketing@rbaker.com
 

Full News Archive

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

Recent News

Fire truck being lowered into 9/11 Museum NYC
Spreader Beams a Top Choice for Rigging Stability and Safety

The spreader beam, also known as a spreader bar, is a popular below-the-hook lifting device used to widen lifting points and stabilize and support a load during a crane lift. It consists of a long...
Safety Basics for Demolition Work, photo shows lighting around demolished concrete
Important Safety Basics for Interior Demolition Projects

Demolition can be a dirty business with ever-changing safety concerns. Every project is unique, but there are three basic things that should be addressed in every interior demolition project to help...
Tool and Equipment Tracking - Crane Rigging NYC
Tool and Equipment Tracking - Crane Rigging

Crane rigging requires a lot of tools and equipment. Visitors to a large R. Baker & Son rigging operation might see forklifts, cranes, excavators, generators, articulating booms, front loaders,...
 Sweeping Compounds for Cleanup of Demolition Dust, Dirt, Silica, and Other Particulates
Cleanup of Demolition Dust, Dirt, Silica, and Other Particulates

Demolition is a dirty job that can produce layers of dirt, dust, and silica that settle on floors and other flat surfaces. There are various techniques and equipment such as misting cannons,...
Rigging equipment, rigging hook, NYC
Auger and Centrifuge Rigging Project

An existing customer called R. Baker & Son needing assistance with rigging equipment duringtheir facility’s annual cleaning and maintenance project. The manufacturing plant was set up for...
Cooling Tower Dismantling Project
University Cooling Tower Dismantling Project

A large Staten Island mechanical contractor contacted R. Baker & Son to remove a 1,000-ton cooling tower at a university to make way for a new high-efficiency tower and filtration system. The...
Danger sign for rigging, dismantling & demolition site
Rigging, Dismantling & Demolition Project Safety

Safety is the number one priority on every R. Baker & Son project, from dismantling, rigging, and demolition, to plant decommissioning, plant relocation, and environmental services. Safeguards...
construction worker performing a multi heat exchanger changeout 
Baker Performs Multi Heat Exchanger Changeout

Back in early 2021, R. Baker & Son took part in a food manufacturing construction project in which we performed rigging and assembly of six large, high-pressure steam ovens over a ten-week...