All Industrial Services Inc. of New Jersey| 190 Boundary Rd, Marlboro, NJ 07746
quote@rbaker.com| 732-222-3553|         
 
All Industrial Services Inc. of New Jersey| 190 Boundary Rd, Marlboro, NJ 07746
quote@rbaker.com| 732-222-3553|         
190 Boundary Rd, Marlboro, NJ 07746 732-222-3553
asset recovery, rigging team with sling and interior demolition

Hospital Selective Demolition: Clearing a 7-Story MEP Shaft with Zero Patient Disruption

Rigid ICRA containment airlock with negative pressure HEPA filtration isolating hospital selective demolition from patient floors

If you’ve ever looked up or down a mechanical shaft, you know it’s the main artery of a building. Electrical, mechanical, controls, and plumbing systems all run through it to feed every floor of a multistory building. So when an older hospital needed to clear out one of its main utility shafts to make room for new MEP systems and a future wing expansion, R. Baker was brought in to handle the selective demolition.

The shaft rose seven stories, including the basement mechanical area. At 10' x 8', it was fairly large, and it was packed with ductwork, chilled water, steam, condensate, plumbing, electrical, and fiber optic cabling. Nearly everything inside had to come out. The challenge was the location: the shaft ran up the very back of six occupied patient floors, and two of them were ICUs. Patient safety came first, and this was not going to be a simple demolition project by any means.

R. Baker met with hospital staff representatives and reviewed the layout of every floor in detail so we fully understood the risks, challenges, and opportunities. At the rear of each patient floor sat the mechanical shaft and a small mechanical room, with a stairwell right next to them. That stairwell had to stay open for emergency egress, but it also gave us a way to reach each floor without constantly walking through patient areas. R. Baker proposed a detailed ICRA plan that completely isolated the mechanical area from the patient area using a negative pressure HEPA airlock, monitored with a visible Magnehelic gauge.

With the containment in place, we could work safely inside the small mechanical rooms, which were stacked directly above one another beside the shaft. To reach the shaft itself, we had to fully open the wall inside each mechanical room. Over the years, many of the MEP systems had been abandoned, while others were still in service. Because we knew no construction debris could travel through the patient areas, our plan had to be different. R. Baker’s foreman saw an opportunity in an existing 4' x 3' HVAC duct. We would use it first as a debris chute, then use the opening to lower cut sections of plumbing, drain lines, sprinkler pipe, conduit, and more.

Starting on the sixth floor, we opened the wall 8' x 8'. The ductwork came out easily since it was slip and drive construction. Before going further, R. Baker marked every system that had to remain in place, including active electrical lines, fiber optic cabling, and steam, with bright fluorescent paint. We then set up an electric winch and pulley to lower heavier items through the duct to the basement. Cut wall sections were lowered to a waiting buggy in the mechanical room. Cast iron sanitary lines and conduit went down to the basement, and the ductwork was detached, sheared into pieces, and sent down the same chute.

In effect, the shaft became a large funnel carrying the old MEP systems down to the basement. From there, two forklifts small enough to maneuver between the mechanical equipment carried the debris out to a dumpster outside.

R. Baker worked from the sixth floor down to the fifth, then the fourth, and on to the first, completing one floor per day. The hospital was amazed and grateful that nothing, absolutely nothing, passed through the patient areas. As each floor was finished, every area inside and outside the shaft was vacuumed, and the ICRA barrier was removed after inspection. With the shaft cleared and ready, the hospital was able to move forward with its new wing expansion.

No matter the challenge, R. Baker will always find innovative ways to meet our clients’ goals. It’s why we’ve been around for more than 90+ years and counting.

About R. Baker & Son All Industrial Services Founded in 1935, R. Baker & Son All Industrial Services is the oldest and largest certified Minority and Women-Owned Business Enterprise (M/WBE) demolition contractor in North America. For more than 90 years, we have served as a trusted partner for complex interior, industrial, and commercial projects across the United States, Canada, and Puerto Rico.

Backed by significant bonding capacity and an industry-leading safety record—including extensive experience on OSHA VPP Star sites—our teams deliver precision, strict containment, and zero-disruption execution in sensitive environments. Our comprehensive capabilities include selective demolition, interior gut-outs, MEP system removal, heavy rigging, and industrial dismantling.

Discover why leading healthcare institutions and commercial clients rely on R. Baker & Son for their most demanding projects. Learn more about our selective demolition capabilities.

Full News Archive

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

Recent News

Rigid ICRA containment airlock with negative pressure HEPA filtration isolating hospital selective demolition from patient floors
Hospital Selective Demolition: Clearing a 7-Story MEP Shaft with Zero Patient Disruption

If you’ve ever looked up or down a mechanical shaft, you know it’s the main artery of a building. Electrical, mechanical, controls, and plumbing systems all run through it to feed every...
Remote-controlled Brokk demolition machine performing precise concrete breaking on a high-risk construction job site.
How Remote Controlled Machinery Improves Demolition & Job Site Safety

According to OSHA, falls remain the number one safety issue on construction job sites. Struck-by incidents, electrocution, and caught-in or caught-between hazards round out what OSHA calls the Focus...
R. Baker & Son riggers setting water-cooled centrifugal chillers for data center cooling availability.
Data Center Rigging & MEP Installation: Keeping Projects on Schedule

Safe, efficient rigging and assembly of data center MEP systems starts with understanding how a data center operates. That means knowing what mechanical and electrical equipment is required, how each...
An 80-ton crane hoisting a new MRI machine during a medical equipment replacement project
Swapping an 8-Ton MRI in 48 Hours: Inside a Complex Medical Rigging Project

Six months after rigging two MRI machines, a CT scanner, a PET scanner, and their associated chillers and cooling equipment into a brand-new medical treatment facility, we got another call from the...
Precision Chiller Dismantling & Mechanical Retrofit Case Study
Precision Chiller Dismantling & Mechanical Retrofit Case Study

A local New Jersey representative for a major chiller manufacturer recommended R. Baker & Son for a demanding chiller change-out project. The scope: remove two 1,200-ton chillers and their...
Discover how a custom negative pressure wall and real-time monitoring protected a pharmaceutical cleanroom during high-stakes facility demolition.
How to Protect Active Cleanrooms During Demolition: A Negative Pressure Wall Case Study

Protecting a client's environment during demolition and renovation work has always been part of what we do at R. Baker & Son. Anyone in the industry knows ICRA protection, the barrier system...
rigging medical equipment into a hospital - R. Baker & Son
Just-in-Time Rigging Keeps a Hospital Running During a Critical Enabling Project

R. Baker & Son received a call from a concerned South Jersey mechanical contractor facing a complex rigging project on a tight deadline. Another rigging contractor had passed on the job late in...
Riggers assembling tower crane sections during construction - R. Baker & Son - Master Riggers.
How Mobile and Tower Cranes Are Assembled & Dismantled

Mobile cranes come in many styles, shapes, and sizes, with the hydraulic crane and the luffing jib being the most common. R. Baker & Son has worked with just about every mobile crane on the...