All Industrial Services Inc. of New Jersey| 190 Boundary Rd, Marlboro, NJ 07746
quote@rbaker.com| 732-222-3553|         
 
All Industrial Services Inc. of New Jersey| 190 Boundary Rd, Marlboro, NJ 07746
quote@rbaker.com| 732-222-3553|         
190 Boundary Rd, Marlboro, NJ 07746 732-222-3553
asset recovery, rigging team with sling and interior demolition

Negative Pressure Demolition in an Active Pharmaceutical R&D Laboratory

Nine downflow booths carefully dismantled and packaged for refurbishment during pharmaceutical lab renovation.

R. Baker & Son had the unique opportunity to return to a pharmaceutical R&D laboratory project we had successfully completed years earlier, where our riggers and millwrights originally installed nine downflow booths. The client needed to reclaim the valuable real estate occupied by these booths to accommodate their expanding laboratory and process requirements.

Strict Safety Requirements for Occupied Laboratory Demolition
Our client established several critical requirements as we prepared to work within their active, occupied lab building. First, we needed to safely isolate the downflow booth area to prevent any dust or contaminants from escaping into surrounding laboratories. Second, they requested that we carefully dismantle the downflow booths and preserve them for reconditioning and future use at another facility. Finally, critical fiber optic cabling running above the work area required complete protection throughout the project.

Comprehensive Safety and Decontamination Protocol
Working with R. Baker's approved safety and demolition plan, the owner removed all HEPA filtration systems from the downflow booths and had the entire area professionally decontaminated before any dismantling or demolition activities began. The electrical and mechanical teams performed all required lockout/tagout procedures to ensure everyone’s safety.

Creating Negative Pressure Conditions
In collaboration with the controls contractor, we developed a strategic plan to shut down the supply air system while utilizing the downflow booth's main exhaust system to create negative pressure conditions within the work area. We installed two layers of MERV 8 filter fabric over the main exhaust to maintain clean ductwork throughout the project. Two Magnehelic gauges were strategically placed to provide continuous verification to the client that the workspace maintained negative pressure relative to the exterior laboratories at all times.

Protecting Critical Infrastructure
The IT department worked closely with R. Baker teams to clearly identify existing fiber optic conduits using fluorescent paint and colored ribbons, ensuring complete protection of these vital communication systems. After all electrical systems and sprinkler lines were properly isolated and secured, R. Baker deployed parallel work crews. One team carefully dismantled the existing downflow booths while another performed selective demolition by removing corridor ceilings, lights, sprinkler systems, and ductwork before progressing to walls and flooring.

Preservation and Material Management
We meticulously dismantled, bundled, and individually packaged all nine downflow booths for refurbishment and future installation at another facility. As ductwork removal progressed, our team continuously monitored and replaced the MERV 8 exhaust filtration in both the workspace and exhaust fan system. All contained demolition materials were removed during off-hours via a freight elevator located just outside the work area to minimize disruption to laboratory operations.

Overcoming Project Challenges
One particular challenge involved removing the epoxy floor coating throughout the space. To maintain our project schedule, we brought in additional ride-on floor scrapers to expedite this labor-intensive process. We also removed several large Mettler Toledo floor scales, filling the resulting voids with rebar and concrete for structural integrity.

Daily housekeeping protocols included comprehensive broom sweeping using dust-control sweeping compound, along with HEPA vacuuming of all nooks and crannies to maintain the cleanest possible environment.

Minimizing Disruption to Active Research
To absolutely minimize disruption to surrounding active laboratories, our demolition teams worked every other Saturday to complete noisy demolition activities and any work involving significant vibration during times when the building had minimal occupancy.

Project Success and Client Satisfaction
Upon demolition completion and final punchlist review, the client expressed high satisfaction with the results, confirming that new construction could begin on schedule as planned. They were particularly impressed with the effectiveness of our negative pressure exhaust system - so much so that they maintained it throughout the subsequent new construction phase to preserve a clean workspace and protect the overall building environment.

R. Baker & Son - Rigging & Demoliton Contractors
190 Boundary Road
Marlboro, NJ 07746
732-222-3553

https://www.rbaker.com/dismantling-contractors.php

Full News Archive

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

Recent News

Rigid ICRA containment airlock with negative pressure HEPA filtration isolating hospital selective demolition from patient floors
Hospital Selective Demolition: Clearing a 7-Story MEP Shaft with Zero Patient Disruption

If you’ve ever looked up or down a mechanical shaft, you know it’s the main artery of a building. Electrical, mechanical, controls, and plumbing systems all run through it to feed every...
Remote-controlled Brokk demolition machine performing precise concrete breaking on a high-risk construction job site.
How Remote Controlled Machinery Improves Demolition & Job Site Safety

According to OSHA, falls remain the number one safety issue on construction job sites. Struck-by incidents, electrocution, and caught-in or caught-between hazards round out what OSHA calls the Focus...
R. Baker & Son riggers setting water-cooled centrifugal chillers for data center cooling availability.
Data Center Rigging & MEP Installation: Keeping Projects on Schedule

Safe, efficient rigging and assembly of data center MEP systems starts with understanding how a data center operates. That means knowing what mechanical and electrical equipment is required, how each...
An 80-ton crane hoisting a new MRI machine during a medical equipment replacement project
Swapping an 8-Ton MRI in 48 Hours: Inside a Complex Medical Rigging Project

Six months after rigging two MRI machines, a CT scanner, a PET scanner, and their associated chillers and cooling equipment into a brand-new medical treatment facility, we got another call from the...
Precision Chiller Dismantling & Mechanical Retrofit Case Study
Precision Chiller Dismantling & Mechanical Retrofit Case Study

A local New Jersey representative for a major chiller manufacturer recommended R. Baker & Son for a demanding chiller change-out project. The scope: remove two 1,200-ton chillers and their...
Discover how a custom negative pressure wall and real-time monitoring protected a pharmaceutical cleanroom during high-stakes facility demolition.
How to Protect Active Cleanrooms During Demolition: A Negative Pressure Wall Case Study

Protecting a client's environment during demolition and renovation work has always been part of what we do at R. Baker & Son. Anyone in the industry knows ICRA protection, the barrier system...
rigging medical equipment into a hospital - R. Baker & Son
Just-in-Time Rigging Keeps a Hospital Running During a Critical Enabling Project

R. Baker & Son received a call from a concerned South Jersey mechanical contractor facing a complex rigging project on a tight deadline. Another rigging contractor had passed on the job late in...
Riggers assembling tower crane sections during construction - R. Baker & Son - Master Riggers.
How Mobile and Tower Cranes Are Assembled & Dismantled

Mobile cranes come in many styles, shapes, and sizes, with the hydraulic crane and the luffing jib being the most common. R. Baker & Son has worked with just about every mobile crane on the...